Combo Decoiler Straightener 2 in 1 Machine and NC Servo Feeder Machine Delivered to UK

As time goes by, more and more clients recognize the SUNRUI combo decoiler straightener 2 in 1 machine and NC servo feeder machine and our machine is very popular in international market.

We delivered our bestseller NC servo feeder machine and combo decoiler straightener 2 in 1 machine to our UK client.

This combo decoiler straightener 2 in 1 machine and NC servo feeder machine is equipped with the stamping press which the stroke reaches up 220SPM with the feeding pitch leas than 200mm for metal sheet stamping process in European market.

Coil car: Assist loading the coil onto the mandral of the decoiler machine

Pressure arm: Pneumatic drive, it’s used to pressing the coil strips to avoid coil disperse

Keep-off arm: The operation of the Keep-off arm is simple and convenient. The Keep-off arm can rotate with any force of the spindle without power and is in operation, it’s used to prevent the coil strips from slipping in the process of feeding

Support Arm: Lead the coils loop into the straightening and feeding part smoothly.

Lift up the coil strips in order to easy to feed by pneumatic drive, and also can be manually up and down, and the supporting arm must be in the lowest position when the machine in automatic operation.

Coil inlet swing arm: Can be automatically put the coil strips into straightener and feeder part without manual operation.

Straightener: Straightening the coil strips to make its surface smooth and lead the coil loop into the feeder machine.

NC servo feeder machine which lead the coil strips into the stamping presses or shearing machine according to the set length and speed. 

SUNRUI machine is a manufacturer of metal sheet stamping line for all kinds of products, warmly welcome to inquiry about the metal sheet stamping solutions!